WingIt Grab Bar Fastening Systems are made from 18/8 Stainless Steel and can be used in most hollow wall construction (To see Installation Instructions click here.)

WingIts become waterproof as they are installed into the wall.

Standard WingIts can be installed into wall substrates (tile, drywall, etc.) up to 1.5" thick.

Extended WingIts can be installed into wall substrates (tile, drywall, etc.) from 1.5" to 2.5" thick.

WingIts use 3M's best waterproofing adhesive to install completely waterproof in minutes.

1 1/4" hole required for installation - use an industrial carbide hole saw or 1 1/4" Diamond Electro Plate Core Bit.

Typical straight Grab Bars use two WingIts. (Order 2 per bar.)

WingIt Accessories: (Sold Separately)

• 2L 1/2" Hex Shank Hole Saw Arbor
• 1-1/4" Dia Carbide Tipped Hole Saw