Snap Toggle Anchors

Home > FASTENERS >

Snap Toggle Anchors

Attributes of SNAPTOGGLE anchors that make them superior to conventional toggle bolts, such as wing toggles or gravity toggles...

Strongest toggle bolt in smallest hole
Easy to use - pre-installs without a bolt
Cost-effective - turns a 2-person job into a 1-person job and gets the job done faster
Convenient - allows removal of bolt or fixture without anchor falling behind the wall
Reliable - will not damage or break through wall even when vibrated
Accurate - Rugged pre-installation mechanism centers metal channel in small hole, before bolt insertion - and bolt won't sag
Quick - Can be used with a screw gun - anchor won't spin in hole

Holds up to:

265 lbs in 1/2" drywall (with BB anchor)
1080 lbs in concrete (with BB anchor)

(Suggest 4 per bar)

[These anchors require 1/4-20 bolts. Bolts NOT included.]

List Price: $7.00
Our Everyday Low Price... $4.27
You save $2.73!

Availability:: Usually Ships in 3 to 5 Business Days
Product Code: SNAP TOGGLE ANCHORS

Qty:

Description

Technical Specs

Snap Toggle Anchors

Most national and local building codes require that grab bars be able to sustain 250 pounds of dead load force. The BB 1/4"-20 SNAPTOGGLE toggle bolt substantially exceeded that requirement, holding 360 pounds in 1/2" drywall in tests conducted by the Cornell University / Joan and Sanford I. Weill Medical College / Gerontological Environmental Modifications unit and the Eastern Paralyzed Veteran's Association in the EPVA's lab in Fort Totten, New York, in April 2002. The SNAPTOGGLE toggle bolt [called the "Toggler Bolt" in these tests] was the only anchor that met this requirement when tested in drywall alone! See the test results here: www.environmentalgeriatrics.com

HOW DO THEY WORK?

Ideal for Heavy Loads in Hollow Walls, Ceilings & Floors

TOGGLER brand toggle bolts always result in the lowest possible installation cost!

TOGGLER toggle bolts pre-install without a bolt and can be installed with a screw gun. This allows one-person installations (instead of two), saving time and money. It's like having an extra pair of hands.

WHY ARE THEY BETTER THAN CONVENTIONAL ANCHORS?

Attributes of TOGGLER brand toggle bolts that make them superior to conventional toggle bolts, such as wing toggles or gravity toggles...

Most reliable: Will not damage or break through wall even when vibrated.
Easy to Use: Pre-install without bolt.
Accurate: Rugged pre-installation mechanism centers metal channel in small hole, before bolt insertion -- and bolt won't sag.
Quick: Can be used with a screw gun -- anchor won't spin in hole.

All sizes available in 304 stainless steel too!

INSTALLATION OF SNAPTOGGLE TOGGLE BOLTS

Drill 1/2" hole. Hold metal channel flat alongside plastic straps and slide
channel through hole. Minimum clearance behind wall: 1-7/8".

Hold ends of straps between thumb and forefinger and pull toward you
until channel rests flush behind wall. Slide plastic cap along straps with
other hand until flange of cap is flush with wall.

Snap straps at wall by pushing side to side, snapping off straps
level with flange of cap.

Place grab bar over flange. Insert bolt through the grab bar flange
and tighten until flush against grab bar, then stop. Do not over-tighten.

APPLICATIONS
TOGGLER brand SNAPTOGGLE toggle bolts are designed to support heavy loads, such as the following, in hollow walls, ceilings, and floors:
Partitions, Window treatments, Garage doors, Lighting fixtures, Hand rails, Grab bars, Roofing and Decking, Sinks, Heavy fans, DSS antennae, Shelving, Awnings, TV brackets, Marine applications, Cabinets, Heavy machinery, ADA hardware, Office furniture

MATERIALS
TOGGLER brand SNAPTOGGLE toggle bolts can be used in almost any hollow material, including:
Hollow Block, Gypsum Board, Paneling, Cinder Block, Drywall, Fiberglass, Concrete Block, Hollow Brick, Boat Decks, Cement Board, Plaster, Composite Panels

For technical specifications on the SNAPTOGGLE toggle bolts click here.

Features
Installation:

Share your knowledge of this product with other customers... Be the first to write a review

	Shower Curtain $15.95
	1 1/2" Satin Nickel Grab Bar $58.09
	1 1/4" Satin Nickel Grab Bar $59.50
	Rectangular Shower Seat with Legs $347.50
	Raised Toilet Seat $66.23
	Prison / Vandal Proof Grab Bar $53.08
	1 1/4” Polished Chrome Wall to Floor Safety Rail with Outrigger $76.34
	1 1/4” Polished Chrome Wall to Floor Safety Rail $53.50
	1 1/4" Polished Chrome Grab Bar $43.95